cara menyembunyikan ip address tanpa software

Mesh environments use a wireless backhaul to carry traffic between mesh nodes. Or a mesh point-an AP that establishes a path to the controller via the mesh portal

A mesh node is eitherĪ mesh portal-an AP that uses its wired interface to reach the controller You can also configure signatures to detect and prevent intrusions and attacks.Ĭonfigure Aruba APs as mesh nodes to bridge multiple Ethernet LANs or extend wireless coverage.

ARM provides several configurable settings.Ĭonfigure settings to detect and disable rogue APs, ad-hoc networks, and unauthorized devices, and prevent attacks on the network. Note: The 802.11n features, such as high-throughput and 40 MHz configuration settings, are supported on APs that are 802.11n standard compliant.Ĭonfigure Voice over IP call admission control options and bandwidth allocation for 5 GHz (802.11a) or 2.4 GHz (802.11b/g) frequency bands of traffic.Ĭonfigure settings for balancing wireless traffic across APs, detect holes in radio coverage, or other metrics that can indicate interference and potential problems on the wireless network.Īdaptive Radio Management (ARM) is an RF spectrum management technology that allows each AP to determine the best 802.11 channel and transmit power settings. Within the regulated transmission spectrum, you can configure 802.11a, 802.11b/g, or 802.11n (high-throughput) radio settings. You can also specify the regulatory domain (the country) which determines the 802.11 transmission spectrum in which the AP will operate. Note: All new WLANs are associated with the ap-group named “default”.Īn Aruba AP can function as an AP that serves clients, as an air monitor (AM) performing network and radio frequency (RF) monitoring, or as a hybrid AP that both serves clients and performs spectrum analysis a single radio channel. The WebUI includes a WLAN Wizard that provides easy-to-follow steps to configure a new WLAN. WLAN configuration includes the authentication method and the authentication servers by which wireless users are validated for access. An AP broadcasts the SSID (which corresponds to a WLAN configured on the controller) to wireless clients. Table 20 AP Configuration Function Overview (Continued)Ī wireless LAN (WLAN) permits wireless clients to connect to the network. Table 20 list the basic configuration functions and features.

You configure APs using the WebUI and the CLI on the controller. The following topics are included in this chapter: This chapter gives an overview of the basic function of each AP profile, and describes the process to install and configure the APs on your network. When an AP is first installed on the network and powered on, the AP locates its host controller and the AP’s designated configuration is “pushed” from the controller to the AP. In ArubaOS, related configuration parameters are grouped into profiles that you can apply as needed to an AP group or to individual APs.

Cara menyembunyikan ip address tanpa software